Exhibitors 2023
Booth: SmarAct Metrology GmbH & Co. KG
SmarAct Metrology GmbH & Co. KG presents its turnkey solution to measure vibrations of micromechanical structures with sizes that range from just a few µm to multiple cm. With a very compact measurement head, vibrations at different planes and even through silicon enclosures can be measured in situ and in combination with a nanoprober inside an electron microscope. We also offer feasibility studies, measurement services and comprehensive support to accompany you along your projects.
SmarAct Metrology GmbH & Co. KG
Rohdenweg 4 26135 Oldenburg I Germany
Melissa Skrivanek
+49 441 800879 424
skrivanek@smaract.com
Booth: InfraTec GmbH Infrarotsensorik und Messtechnik
InfraTec is one of the leading suppliers of commercial thermal imaging technology for thermographic temperature measurement. The wide range of high-performance cameras like its ImageIR® series together with InfraTec’s efficient and convenient thermographic software IRBIS® will make electronics testing also at a µm scale fast and precise. Additional lock-in routines allow for the detection of failures resulting only in smallest thermal differences in the µK range. The fully integrated solution E-LIT will most effectively run complex testing routines of PCB, chips or components based on specific customer demands.
InfraTec GmbH Infrarotsensorik und Messtechnik
Gostritzer Str. 61-63 I 01217 Dresden I Germany
Conny Schmidt
+49 351 828760
c.schmidt@infratec.de
Booth: Digit Concept SA
DC has been helping FA/QA for 30 years now and is one of the leading suppliers of commercial IC Decapsulation, Cross Sectioning and PCB Cut tools.
We design and manufacture state of the art equipments and this year we will show the newest ones:
SesamePLASMA : iMIP™ release 2022
SesameMICROMACHINING™ LASER : used before FIB
We will be happy to present you on our booth the last release of:
SesameLASER : SLP500
SesameACID : iSA777
SesameMECHANICAL : ASAP-1 Up-Grade
As always with DC you can UP-GRADE or TRADE-IN your old equipment with iPanel™
Have a fruitful CAM-WORSHOP with DC.
Digit Concept SA
Chemin Saint Sulpice 2 I 14740 Secqueville en Bessin (FR)
Michael Obein
+33 682062 628
m.obein@digit-concept.com
Booth: Allied High Tech Products, Inc.
For over 40 years, Allied High Tech Products has provided sample preparation products for failure analysis to the microelectronics industry. Allied manufactures cutting-edge equipment at its facilities with all design, manufacturing and assembly taking place in-house to ensure the highest quality equipment is produced. Allied’s state-of-the-art equipment includes the X-Prep® Precision Polishing/Grinding/Milling Machine, MultiPrep™ Polishing System, MetPrep Grinding/Polishing Systems and TechCut™ Sectioning Saws. Please stop by our Stand for more in-depth information.
Allied High Tech Products, Inc.
E. Pacifica Place 2376 I 90220 Compton I US
Chris Richardson
+1 9702220482
crichardson@alliedhightech.com
Booth: JP Kummer Semiconductor Technology GmbH
The JP Kummer Semiconductor Technology GmbH is a specialist European Distributor of instruments and consumables mainly for the Semiconductor industry, but also for the Medical Device, Aerospace, Solar and related Industries. We attach great importance to trade with reliable products. We verify the quality of the manufacture of the products sold by us regularly. Our employees are trained in continuous intervals of our suppliers and maintain them with an intensive exchange of information.
Using our long established relationships within these industries worldwide, we bring the newest and most technologically advanced products in their fields to the European market.
JP Kummer Semiconductor Technology GmbH
Steinerne Furt 78 I 86167 Augsburg I Germany
Andreas Schupp
0049 821 999773 90
sales_de@jpkummer.eu
Booth: Kleindiek Nanotechnik
Kleindiek Nanotechnik is active in the realm of in situ nanopositioning and has spent the last twenty years focussing on nanoprobing applications. This focus has yielded highly stable and easy-to-use platforms that can be integrated into virtually any SEM or (P)FIB/SEM in the field, thereby transforming the microscope into a high-end nanoprobing and fault localisation/analysis platform.
Our systems are driven by custom built software that provide intuitive controls for the placement of the probes with sub-nm precision as well as visualisations for facilitating fast and effective nanoprobing workflows. These include device characterisation, EBIC, EBAC, etc. All from a single, unified GUI.
Kleindiek Nanotechnik
Aspenhaustr. 25 I 72770 Reutlingen I Germany
Andrew Jonathan Smith
+49712134539512
andrew.smith@kleindiek.com
Booth: Sector Technologies
SECTOR TECHNOLOGIES is a distributor Company of failure analysis high-end equipment for the Semiconductor Industry .
Our product portfolio includes:
Lock-in Thermography ( Elite), EMMI ,laser scanning microscopy and LVI/LVP applications (Meridian family) and nanoprobing ( nProber IV, Hyperion) from ThermoFisher.
Samples preparation and backside silicon thinning tooling: JetEtch and PlasmaEtch from Nisene, varioMill from Varioscale for outstanding automated backside preparation.
For electrical test and design debug: Mutest introducing M5S-HD, Teseda V550, Focused Test for SIC and GaN test, test analysis software GAT from IPPON.
IR microscopes and HR IR lenses from Seiwa.
Sector Technologies
rue Lamartine 24 I 38320 Eybens I France
Yvan Pfefer
+33619565386
yvan.pfefer@sector-technologies.com
Booth: Hamamatsu Photonics Deutschland GmbH
HAMAMATSU PHOTONICS is one of a few companies in the world that develops a wide range of light sensors, such as photodiodes, image sensors and photomultiplier tubes, as well as number of light sources.
Our portfolio of more than 10,000 products does not only include components, but also fully integrated systems, like our new emission microscope PHEMOS X for failure localization in semiconductor devices.
The Phemos X is designed for the analysis of Logic and Power Devices, including advanced CMOS technologies. It can be equipped with up to 5 lasers from VIS to NIR and different detectors. Its structure is flexible to embed each of those approaches, either individually or as “all in one”.
HAMAMATSU PHOTONICS Deutschland
Arzbergerstr. 10 I 86492 Herrsching I Germany
Anne Reiner
+49 81523750
info@hamamatsu.de
Booth: PVA TePla Analytical Systems GmbH
PVA TePla Analytical Systems GmbH has been a ground-breaking expert in the field of acoustic microscopy for more than 30 years. With a range of leading solutions to suit all industries and fields of technology, we enable our customers to perform reliable non-destructive materials testing—from the inspection of solar and semiconductor systems all the way to failure analyses for ingots used in the production of wafers and MEMS systems.
PVA TePla Analytical Systems GmbH
Deutschordenstrasse 38 I 73463 Westhausen I Germany
Kasim Altin
+4915114831070
kasim.altin@pvatepla.com
Booth: JIACO Instruments B.V.
JIACO Instruments Microwave Induced Plasma (MIP) decapsulation is the new standard for reliable Failure Analysis and Quality Control. The fully automated atmospheric plasma decapsulation process is highly selective; critical failure sites in packages (e.g. wire bond, SiP, WLCSP, 2.5D, 3D) are retained without process-induced damage to challenging materials and structures, such as Ag and Cu bond wire, GaAs, Cu RDL, BOAC, SAW/BAW filters.
The JIACO Instruments MIP system has been in the market since mid-2016 and is in use by many renown global companies for reliable failure analysis and quality control. We look forward to speaking with you on your decapsulation challenges during CAM Workshop.
JIACO Instruments
Feldmannweg 17 I 2628 CT Delft I The Netherlands
Mark McKinnon
+31625261648
info@jiaco-instruments.com
Booth: Eurofins | MASER
Eurofins | MASER is an independent engineering service provider for reliability test and failure analysis of micro-electronic components and systems. We offer advanced facilities for Integrated Device Manufacturers, Fabless and Labless IC manufacturers as well as the Original Equipment Manufacturing companies in our main lab in Enschede, The Netherlands.
Eurofins | MASER
Auke Vleerstraat 26 I 7521PG Enschede I The Netherlands
Thijs Kempers
+31657591958
thijs.kempers@maser.nl
Booth: point electronic GmbH – Imina Technologies S.A.
point electronic GmbH is an independent supplier of detectors, acquisition and control systems for SEM, TEM and Micro-analysers. The company is a leader in development of custom microscopes and techniques, such as Topography, EBIC and EBAC/RCI, as well as electrical failure analysis instrumentation. point electronic also provides microscope services, up to complete electronics and software upgrades.
Imina Technologies SA is a Swiss manufacturer of robotic solutions for the characterization of samples under optical microscopes (OM), FA inspection tools, Probe Stations and scanning electron microscopes (SEM/FIB). Imina is one of the leaders in the semiconductor test equipment market for micro & nanoprobing and electrical failure analysis.
point electronic GmbH
Erich-Neuß-Weg 15 I 06120 Halle I Germany
Dr. Grigore Moldovan
+49 157 58076085
gm@pointelectronic.de
Booth: Quantum Design GmbH
For more than 50 years, Quantum Design Europe has been one of the leading distributors of high-tech systems and components for research and industry. With 120 employees in 20 European countries, we offer the broadest selection with an exciting mix of suppliers from long-established corporations on the one hand and innovative start-up companies on the other.
We will present the following systems at CAM workshop:
- Correlative SEM-AFM with the FusionScope from QD Microscopy
- Breakthrough x-ray analysis systems from Sigray (XRF, XAS, XRM,…)
- In-situ microscopy solutions (force, temperature, liquid,…) from Deben and DENSsolutions
- Sputter & carbon coaters from Quorum
Quantum Design GmbH
Im Tiefen See 58 I 64293 Darmstadt I Germany
Andreas Bergner
+49 6151 8806-0
bergner@qd-europe.com
Booth: 3D-Micromac AG
3D-Micromac’s microPREP™ PRO facilitates laser-based sample preparation within minutes. It enables high-volume sample preparation of metals, semiconductors, ceramics, polymers and compound materials.
microPREP™ PRO complements existing approaches to specimen preparation such as TEM, SEM/FIB cross sectional analysis, atom probe, X-ray tomography and micromechanical testing processes. A choice of laser sources is available for installation to enhance the individual preparation process.
3D-Micromac is the leading specialist in laser micromachining. We develop processes, machines and turnkey solutions for mass production as well as R&D.